Home / Physics / Pulley Simple Machine

# Pulley Simple Machine

## What is a Pulley

A pulley is a simple machine consisting of a wheel rotating about its axle. It is constructed by looping a rope around the wheel. A pulley is used to lift a heavy object by applying force at one end of the rope.

The Greek mathematician and physicist Archimedes is credited to have invented the pulley in the 3rd century B.C.

## How Does a Pulley Work

A pulley works by changing the direction of the applied force that is manifested at the object. The wheel rotates about its axle when the rope is pulled from one end and the object is raised above the ground. The other end is either fixed or attached to the object. The groove in the wheel helps to keep the rope in place. Combining two or more pulleys increases the number of loops and reduces the effort required to lift the object. However, the work done will still depend on the mass and the height raised.

## Mechanical Advantage of a Pulley

The mechanical advantage of a pulley is a measure of the effectiveness of the pulley. It calculates how much the applied force multiplies to lift an object effectively. The mechanical advantage is proportional to the number of loops of the rope. A higher mechanical advantage requires low force, but the distance traversed by the rope is greater.

## Types of Pulley

Depending upon how the rope and the wheel are combined, there are three types of pulleys.

### 1. Fixed Pulley

It is the simplest of all pulleys. The pulley is fixed to one spot, and the wheel rotates about its axle. The rope moves over the wheel, pulling the load. The effort required to lift the object is the same as its weight. Hence, the mechanical advantage is equal to 1.

Examples: Pulleys used in flag poles, window blinds, and water wells

### 2. Movable Pulley

It is slightly complex than the fixed pulley. The pulley does not remain fixed. It is attached to the load, and the two move together. The disadvantage is that the pulley itself adds to the weight of the load. This pulley is suitable when the load is below the person lifting it.

Example: Pulley used in a zip line

### 3. Compound Pulley

It combines fixed and moveable pulleys. The advantage is that the effort required to move a load is less than half the load. The more the number of pulleys, the less is the effort. The mechanical advantage is always greater than 2. However, the disadvantage of using a compound system is that the length of the rope and the distance it travels increase. It means that a longer time is required to lift the load.

Example: Block and tackle and pulleys used in construction cranes, modern elevators, and exercise equipment

## Uses and Applications of Pulley

• A flagpole uses pulleys to hoist a flag in schools
• A clothesline in a house uses pulleys to pull clothes towards the user
• An elevator uses pulleys to lift people
• A cargo lift system hoists objects to a higher level using pulleys
• A well uses a single fixed pulley to lift a bucket of water
• Exercise equipment uses a pulley to lift weights
• A crane consists of a pulley system that lifts and moves heavy equipment
• A theatre uses a system of pulleys to lift curtains
• A window blind uses pulleys to open and raise
• A sailboat uses pulleys to raise sails

Article was last reviewed on Friday, November 26, 2021